Impeller 2007 Calabria Pro-V

(jeffn) · (jeffn) **Join Date: Nov 2010** 11-22-2010, 12:50 PM

I have a 2007 Calabria Pro-V and I want to change the impeller. It has a Black Scorpion motor in it. I searched the forums and found some directions (remove the water serperating fuel filter mount, remove serpentine belt, remove pump, etc), but it appears they are related to the motor without the air drain. Am I supposed to remove all of the extra hoses attached to the impeller and pull the entire thing out?

Thanks!

-Jeff

(antoddio) · (antoddio) **Join Date: Dec 2006** 11-22-2010, 2:10 PM

Whats an air drain?

(jeffn) · (jeffn) **Join Date: Nov 2010** 11-22-2010, 3:59 PM

I should have said "air actuated water drain". I have attached a photo from an eariler thread. I have some small hoses connected to 8, 13, and 14.

Thanks!

(wake_upppp) · (wake_upppp) **Join Date: Nov 2003** 11-22-2010, 5:16 PM

Yes remove the entire pump and change out the impeller on the bench. Check you tube for some instructionals.

(justintime) · (justintime) **Join Date: Mar 2009** 11-22-2010, 11:28 PM

post the serial number

some have the air pump

(jeffn) · (jeffn) **Join Date: Nov 2010** 11-27-2010, 8:54 AM

Thanks. Here is the serial number..

OW690745