Clete, that's a great idea thanks for the insight Ben my trailer has the pvc with the guide pads on it so they float and rotate my problem is......if I mount the camera to the pvc, the camera will rotate out of alignment .....if I mount it to the pole under the pvc, the pvc will neither float nor rotate ......if cut a slot in the pvc and mount an arm through it to the pole underneath....the pvc will float but not rotate ......if I mount a bracket to the pole underneath the pvc....up through the top of the pvc (removing the top pvc cap)....the pvc will float and rotate, but only float alittle....and the camera will be more visible for theft the last option is probably what I will go with unless I take the wireless advice am I missing an option any more ideas? thanks I know I'm over thinking it but until I actually start physically working on it....that's just what I do
|