Quick Release 4 speakers plus lights - help

(ride152)

Hey guys - I ordered a pair of Fusion tower speakers with LEDs. I want to install a quick release for the wiring, but can't seem to find a wiring kit that has 10 wires. 8 for the 4 speakers and two for the LEDs in the speakers.
I searched the site and learned about this set up:

Upload

Has anyone here find or know where I can get a 10 wire set up with quick release? I am hoping to order tonight or tomorrow to install Tuesday. Thanks!!

(marknjenn) · (marknjenn) **Join Date: Feb 2005** 03-20-2009, 6:09 AM

These might work for you. http://www.mcmaster.com/#69355k48/=130urx

(brucemac) · (brucemac) **Join Date: Dec 2005** 03-20-2009, 6:11 AM

try a local guitar center for the neutrik connector or any large professional musician store.

(ride152)

Awesome - thanks for the help! Mark - I may go your route if I can't find something local that is cheap.... that way I can go back and get more/something different if needed.

This is the other alternative I just found..
http://www.waterskis.com/Tower-Wiring-Harness-p/tower%20wiring%20harness.htm

I am wondering if 16 gauge is enough though.... thoughts?

(silvermustang35)

Somebody else posted a link I saved regarding speaker wire. May want to have a look at this
http://www.bcae1.com/images/swfs/speakerwireselectorassistant.swf
I'd probably run 14 to 12 gauge in case for the future. But you may not see a noticeable loss with 16 ga.

(wakebrdjay) · (wakebrdjay) **Join Date: Apr 2008** 03-20-2009, 12:10 PM

That's a cool link thanks.