How to snake wires through the tower?

(flyspec14) · (flyspec14) **Join Date: Apr 2005** 08-30-2005, 5:39 PM

I'm in the process of adding more leds & speakers to my currrent setup on my 05 Supra. THE hardest part so far is figuring out how to pull new wires. I currently have wires (power & audio) running through it, should I attach to one of those, pull it out and use that as the pulling wire and then just pull a new wire for the one I canibalize?

I'm not sure that made sense, but any input would be super helpful. THANKS!

(mobv) · (mobv) **Join Date: Jun 2002** 08-30-2005, 5:47 PM

You can probably leave the existing wires in and pull new wires. Feed a fishing line in the lower opening and use a shop vac to suck the fishing line out the opening at the top of the tower. Then attach the new wires to the fishing line and pull.

(mikeski) · (mikeski) **Join Date: Aug 2003** 08-30-2005, 6:17 PM

Try this:

http://www.wakeworld.com/MB/Discus/messages/65921/221331.html

(seattle) · (seattle) **Join Date: Mar 2002** 08-30-2005, 6:34 PM

If you don't have a snake as in the link from Mike, you can use dental floss with a little piece of tape at the end. Place the shop vac over the hole your trying to thread and tape over the hole your feeding through. I've used this method a couple of times and it works well.