Fixing a damaged board

(carcrz) · (carcrz) **Join Date: Mar 2006** 03-11-2007, 11:30 AM

I've got a board that was dropped & has a pretty good size chip in the end of it & has slightly separated on the end. I know it's fixable, I just don't know the best way about doing it. Any good products or places to buy something?

(scotthetland) · (scotthetland) **Join Date: Apr 2002** 03-11-2007, 11:32 AM

buy 2 part epoxy. Can be found at Home Depot or Menards. Cheap and does the job, and is a nice looking clear coat.

(wakeworld) · (wakeworld) **Join Date: Jan 1997** 03-11-2007, 11:32 AM

http://www.wakeworld.com/articles/2004/fixadent.asp

(carcrz) · (carcrz) **Join Date: Mar 2006** 03-11-2007, 11:33 AM

Holy cow that was fast.

(sup208) · (sup208) **Join Date: May 2004** 03-12-2007, 7:51 AM

After my son dinged the edge of my board doing an ollie over a buoy, I used marine epoxy and laid it on a bit thick and then wet sanded it down to match the contour of the board. Marine Tex is also great. We have used it to repair dings in the gel coat of the jet ski

(slipknot) · (slipknot) **Join Date: Aug 2001** 03-12-2007, 8:42 AM

JB Weld works great also

(carcrz) · (carcrz) **Join Date: Mar 2006** 03-14-2007, 12:32 PM

She's curing right now. Hopefully if works out okay.