Quote:
Originally Posted by shawndoggy
Spencer, you really should price him out running the T1200s instead of the 800s. Filling 750s with 800gph pumps takes about a year.
|
The Attwood T800 pumps should take 7 to 8 minutes to fill the 750 lb. sac. Not that bad especially if you are on a budget. You can go with the Tsunami T1200 but I am really stoked on the Rule 1100 ballast pumps right now. After going over test results they have a very similar output to the T1200's. They way easier to integrate since they have a 3/4" inlet and have a true 1" outlet (not 1-1/8"). I have reconfigured the list but by going to 1" the price has gone up. The price for the ballast setup is $1,007.74
Material List:
1 x 3M 4000 Marine Adhesive
1 x 1 1/4" Bronze Thru-Hull Intake
1 x 1 1/4" Bronze Street Elbow
1 x 1 1/4" Bronze Ball Valve
2 x 1 1/4" Intake Tee Fitting
2 x 1 1/4" Intake Nipple Fitting
3 x 1 1/4" Thread > 3/4" Thread Reducer
60 ft. x 1" OEM Ballast Hose Black
3 x Ballast Rocker Switch (Supra Moomba Malibu)
6 x Rule 1100 GPH Ballast Pump
3 x Fly High 3/4" Flow-Rite Quick Release Connect W736
3 x 3/4" Flow-Rite > Attwood Tsunami 800 Pump Adapter
6 x Fly High 1" Flow-Rite Quick Release Connect W743
6 x Fly High 1" Elbow Flow-Rite Quick Release Connector W746
1 x 1" Vented Loop Anti-siphon Valve
5 x 1" Inline Check Valve Fitting
3 x 1" Thru Hull Fitting - Stainless Steel
3 x 1" Hose Barb Tee Fitting
36 x 1" Stainless Steel Hose Clamp