|
This is a related topic to another thread about problems with my HO alt. I asked this question in that thread, but thought it might be a good idea to start a new thread for it.
I am wondering about Stiffening capacitors. I run two 700W Alpine V12's (One for the tower, one for the hull speakers) and one Xtant 1000W sub amp to run my three 10" subs. The two V12's are powered with 4AWG wire and the sub amp is wired with 1/0 AWG wire. Which capacitors do you guys suggest? I know what storage size I need, but is it better to run all three amps off one big cap. or split it up and put a cap. in-line to each amp? Some larger caps. have a distribution block built into them to make the wiring easy and neat. But I've got one 1/0 wire and two 4awg wires. Which caps. would support this setup? What are all your suggestions on brand, size, setup and wiring/Distribution.
Thanks for your help guys!!!
|
Threaded Mode