I've installed a couple towers, I think if you know your way around basic tools, it should be no problem. Here's the advice I can offer: 1) Buy a quality tower (I dont know much about the one you've shown, maybe someone else can chime in. Personally, I like monster for the $) 2) Take your time 3) Use the correct tools, follow instructions carefully 4) Measure very carefully 5) Take your time 6) Measure again 7) Measure 1 more time 8) Drill through gelcoat in reverse (it helps keep the gelcoat from cracking) 9) Don't overtighten the tower mounts 10) Enjoy your new tower, make sure to check all the bolts periodically to make sure they're tight. Don't pay someone to do it unless you're very nervous around handtools. -Steve
|