Hi all, Recently I thought of trying out finless and attempt to drill thru a screw that was seized on my board...unfortunately, i accidentally drilled into my board.. it's not deep.. maybe about 8mm deep, small hole too(smaller than the diameter of the screw)..I have since patched it up with silicon.. wonder if you chaps here got any advice to give on the repair, i dun want any water getting into my wakeboard's core. Also, i am not really sure on the finless thingy, some guys say it doesn't matter.. others say it rides way better, I ride on a 02 premier 140. can't really ride well on my fakie, so a bit skeptical of going finless. Wonder if you guys got any advice to offer... (Message edited by Mirage on May 04, 2006)
|