I posted this over at themalibucrew.com and also wanted to post here because that forum is a bit dead. We took our new Wakesetter 23 LSV out for the second time today and have a few questions about the ballast and wedge guages. Here are my questions. I will ask the dealer but I have found this site to be very helpful and I am just wondering if others have had any of these issues and if there are easy solutions that don't require a trip to the dealer. I will check my owners manual but it is at the office right now. First off the guage readings on the front and middle ballast seem flaky. They would read erratically at times. Second, the mid ballast quit working halfway through the second trip. It reads full and will not empty or fill. Is there a way to reset Third. I am having issues with the wedge guage and getting the wedge to go up and down as expected. The guy who did the demo mentioned something about toggling the wedge switch when I turn the boat on and off so the guage would have the correct position but I am not completely sure what he meant. It worked most of the time but a few times I could not get it out of the down position without turning off the key. Last. When surfing we liked the wake with the wedge in the half down position. When doing this each time I would take off I would get the warning that the wedge is going up for a few seconds on takeoff. If these have been posted about I apologize. I did a quick search and didn't find the answer. Overall I love the boat. I am coming from an 02 MC xstar(x2). Thanks for your help
|