cd hanger in SAN 210

(wakejens) · (wakejens) **Join Date: Nov 2003** 03-08-2004, 9:28 AM

hi,
where is the best place for a cd-changer in a 2003 SAN 210 Team or other boats ?
i don`t now where to built in.
greetings from cold germany

(pjdave) · (pjdave) **Join Date: Oct 2002** 03-08-2004, 11:26 PM

we installed our last 3 stackers in the kick panel at the drivers feet

(wakejunky) · (wakejunky) **Join Date: Apr 2002** 03-09-2004, 6:06 AM

I hung mine under the glove box. I basically pulled up the sano pad and drilled holes into the bottom and then attached the changer mounting board to the underside. I then put the sano pad back down so, that you can't see the screws. I then mounted the CD changer on the board so, that it is just below the lip as you look under the observers seat. This also saves in the long cabling to the drivers side.

Chris
Get the Grip you Deserve
www.wakejunky.com

(tmorefi) · (tmorefi) **Join Date: Jul 2003** 03-09-2004, 7:28 AM

Dave, what is the white case you have surrounding the changer? Is it custom or something that can be purchased. Also, how did you stabilize the changer on the back side?

whitechocolate 03-09-2004, 8:04 AM

I mounted my'n up under the dash. You will have to relocate the Pirfect pass controle unit and then glue a new board that the changer mounts to but the changer will be out of the way and east to get to.

(pjdave) · (pjdave) **Join Date: Oct 2002** 03-09-2004, 11:32 PM

the "white case" is a surounding ring I made out of 20mm plastic and trimmed with matching vinyl. It makes the whole neater where i cut the kickboard, the stacker comes through horozontally and the kickboard is on a backwards lean. There are brackets that come with stacker they i modified to mount it from behind.