What Prop?

(airwarrior04) · (airwarrior04) **Join Date: Aug 2004** 03-11-2007, 9:15 PM

Hello all,

We were at new melones today and pucked up our prop. One of the 4 blades are bent all the way back. My question is should I stick with the same stock prop or shall I upgrade and change size.
Acme vs. OJ. i was looking at the oj xmp edge.

The boat I have is a 2004 Ski Centurion Elite V Drive.

We normally run 1,000 - 1,500 lbs of ballast. We are also doing a lot of wakesurfing lately. I'm not exactly sure what you need to know so ask me if you need more inof from me.

(mikeski) · (mikeski) **Join Date: Aug 2003** 03-11-2007, 9:43 PM

The new Acme's with larger blades have been getting great reviews. You might lose a little top speed but you might drop a few rpms at wakeboard speeds. Look for the Acme 1234.

ejojprop 03-12-2007, 4:22 AM

The Centurion's cannot run the larger diameter propeller. The boat is limited to 13.5" in diameter. What is the gear ratio in your boat? What is the size of the your current propeller?

Eric
OJPROPS.COM

(mikeski) · (mikeski) **Join Date: Aug 2003** 03-12-2007, 10:19 PM

Eric,

What does OJ offer for a 05 Nautique 211/EX, I need out of the hole when loaded for boarding and top speed for footing. Currently running the Acme 1160 with decent results. Our 2001's always ran great with OJ 13x13 supercup props. I like big cups!