chipped board

(whirlynuke02) · (whirlynuke02) **Join Date: Apr 2005** 09-12-2005, 4:08 PM

Hey, I chipped the tip of my board and was wondering what to use for gluing it back together. Its an 05 Balance and i just delaminated it where the top and bottom meet at the tip. the old ollie up onto the dock trick. i was thinking sort of a marine epoxy or something. its not really chipped as much as its delamed.

(ladythump) · (ladythump) **Join Date: Jul 2004** 09-12-2005, 4:38 PM

you can get epoxy at west marine in single serving pouches. that will work just fine.

(whirlynuke02) · (whirlynuke02) **Join Date: Apr 2005** 09-12-2005, 4:55 PM

whats west marine

(wakeworld) · (wakeworld) **Join Date: Jan 1997** 09-12-2005, 5:02 PM

http://www.wakeworld.com/articles/2004/fixadent.asp

(whirlynuke02) · (whirlynuke02) **Join Date: Apr 2005** 09-12-2005, 5:14 PM

awesome. i think that was sort of what i had in mind but that article helps a lot. thanks for that.

(lop) · (lop) **Join Date: Aug 2005** 09-13-2005, 12:49 AM

I filled mine with fiberglass resin and sanded it down ot match the rest of te board.

(jman) · (jman) **Join Date: Jul 2004** 09-13-2005, 7:50 PM

I had a small chip in my board as well, so I used epoxy. After a full day and night, I used a file and sand paper to smoothen it down. Seems to be working all the same still.

(just_board) · (just_board) **Join Date: Jul 2005** 09-13-2005, 8:49 PM

i'm so anal about my equipment, i think i would burst a blood vessle (sp?) if i ever chipped my board