If you look back a few years ago nearly all racks had an opening of just under an inch and nearly all boards were about 3/4"-7/8" thick. We saw boards & skates getting thicker and redesigned the racks to acoomodate this, as well as adjustable fork width to support boards with narrow binding stance. Unfortunatley some of the board companies are now making boards over an inch thick and these wont fit many of the racks that are out there, including ours. On option is to spread the forks open 1/16th to 1/8th of an inch so the board will fit. The board may not slide down all the way to the bottom of the fork but it should get close and be fine if strapped in well.
|