Mallenger
It is very easy if you have the new ballast system (2009 and newer). Your boat is a 2010 right? If so, then you should have it. This was last years boat that I did this, but you simply cut the line on the intake hose right before one of the bags. Slip a ball valve T in there and with it closed your ballast will still perform normal. If you open it it will divert the water to the hose that I ran to a bag. I did a 10' hose so I could fill a bag anywhere in the boat. I then just put a fly high connection on the end and just snapped into bags or hooked to a hose nozzle.
It really is simple...
You will have to program your fill switch to go longer than 4 minutes, but that is also easy.
|