cadence or arc audio amps on wetsound system

IM putting a pair of wetsounds 485s and 6 6 1/2 xs- wetsounds and a xxx-12in sub and wetsounds eq in what amos should i use i heard of these amps cadence zrs3002 for tower speakers ,zrs1004 for the 6 1/2s and the zrs 8000d for xxx-sub and on the arc audio amps the fd4150 one for the tower speakers and one for the 6 1/2s and the fd1200.1 for the xxx-sub let me know what everyone thinks and where can you get the amps and any suggestion on other amps to.

Arc would be my first choice, but I do know people have been using the cadence amps with good results.

If you are willing to spend the money...look at the alpine PDX series.

Tower Speakers: Alpine PDX 4.150 (300x2)
Hull Speakers: Alpine PDX 4.100 (100x4)
Sub: Alpine PDX 1.600 (600 watts)

I bet you could get all these new for under a grand by watching ebay. Awesome speaker selection...don't skimp on the amps

Murph, those amps are significantly cheaper or the same price as the amps he's talking about so clearly he's down to drop the coin. Also the 1.600 isn't gonna do the job on the RE-XXX sub they handle 2k on the low.

Robert, that should be a sick ass system. Those Cadence look like they need a bit higher volts so make sure you have enough alternator too.

I ran the Cadence ZRS series in my last boat and they sounded great! I am using the Cadence Daytona series this time. Just because the ZRSs were not in stock when I ordered.