Black Hulls and 303

(cdm) · (cdm) **Join Date: Aug 2003** 07-15-2005, 8:24 AM

So I applied 303 to the entire exterior of my x-star, it looks great but a lot of work. The 303 goes on really easy, just spray it on.. The hard part is buffing it off. It streaks and takes a lot of elbow grease to remove the excess. Its hard to tell, see streaks on teh white but on the black portion of the hull its obvious. Just curious to see if others have delt with the same issue. Thanks, happy boating!

CDM

alanp 07-15-2005, 8:26 AM

yeah i have. not on the hull but on my dash. usually i just try to get the stuff on but sometimes i try to buff it to remove the streaks.

(big_ed_x2) · (big_ed_x2) **Join Date: Jul 2004** 07-15-2005, 8:27 AM

the reason I haven't put it on my boat cuzz I heard it soo hard to wipe off,tho one of these days.

zboomer 07-15-2005, 9:17 AM

CDM, my hull is completely black, and I also use 303.

Don't worry about the streaks, and don't spend a lot of time buffing them out. Just apply, and wipe off, buffing a little and leaving the streaks.

The very first time you hit the water, and wipe your boat down afterward with damp towel, all streaks will be gone and it will look great.