ive made 2 skimboards and they both came out pretty well, i know its a little bit different but same concept, i drew the shape out on paper, and perfected it, made sure both sides where the same. traced it on plywood, cut it out, rounded all the edges, then put blocks of wood under each end for my desired rocker, then put a 55 gallon drum on top, and filled it with water, i left it for 2 weeks. and when i emptied it the shape didnt change it all. then i put fiberglass cloth and resin over it because it slides on sand, rocks and concrete at one of the spots i used to skimboard at. but im sure you could use a good sealer and it would still work out. let us know how it turns out!
|