Well while loading boat last night I had the trailer slightly too deep and the wind was strong enough that when I went to power up into the boat buddy system I hit the port side bunk ruining my prop
![:-(](http://www.wakeworld.com/MB/Discus/clipart/sad.gif)
So the question is what is a good replacement or upgrade? I typically wakeboard, and rarely ski, so top end speed is not a big loss. The stock prop was a 14"x20"LH. Is going to stainless worth it? Should I take the boat to my dealer and have it repaired or just order the parts from them and replace it myself? I am more worried that there could be damage to the drive shaft or the fins. The prop blades were only bent back about a 1/2". Any suggestions would be appreciated. Thanks.