jjakober, that is a sweet camera and would be great for this application. Andy, the carbon fiber is layed up with epoxy resin then vacuum bagged together. Phaeton, The problem is in reality this is not what happens when this particular layup fails. This is the exactly layup I have used on the last 4 boards I have made. When they fail it will be either a tension failure on the top skin (bottom in this test) or a compression/buckling on the bottom. Where as can been seen when you play either of the videos frame by frame the skin is actually shearing away from the core. Skiing made me board, Lyle Chrome Dome
|