The rear bag on the port side of the boat fills by itself. It fills when the boat is underway or if any of the other bags are filling. I have checked the soleniod valve and it is in the correct position, any other ideas? Also my ballast pump system filter leaks ( a steady drip) is this normal or should I put some teflon tape or something similar on the threads? <BR> <BR>Thanks!
|
Your value is not operating properly, check the switch located on the value for that sac. Otherwise your value need to be cleaned since it must be open. I had the same problem and the switch on the value was in the open position. <BR> <BR>(Message edited by bradstang on August 01, 2006)
|
I have the same problem as well. Was told to check the manual switch on the valve, which is fine. Open to other opinions. <BR> <BR>I'll check my value as well, is that next to the oscillating warbilator?
|
I assume you guys all talking about the same valve as this post: <BR> <BR><a href="http://supramoombariders.com/web/forums/32/ShowPost.aspx" target="_blank">http://supramoombariders.com/web/forums/32/ShowPost.aspx</a> <BR> <BR>The post above was my problem when I had it...
|
Brad- do mean "valve", because I am not sure what "value" is unless you mean the position of the switch on the valve...? <BR> <BR>Bill- yeah that is the same valve, but what Jim G and I are saying is that we have already checked the switch and it is in the correct position, but the bag still fills... I am going to take it apart and see what happens, but I have feeling I am going to have to replace that valve <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/sad.gif" ALT=":-(" BORDER=0>
|
All times are GMT -7. The time now is 11:23 PM. |