hello <BR> <BR>my board got damage at the slider it has a crack on my in board fins. <BR> <BR>whats the best material should i used recine, marine epoxy etc? i heard marine epoxy will crack again.
|
I can't speak too much of ways to repair the bottom of the board, however when I cracked my topsheet, I used a product called SunCure to fill it in. Worked super well. Just a thought.
|
I have used marglass which is a fiberglass bondo. It seems to work pretty well and can be easily sanded smooth again. You can get it at autopart stores.
|
I just use bondo if you have to fill anything. On a few boards I have, I have completely rebuilt the fins with bondo after they were shredded off. If it is a crack then you should use some sort of 2 part epoxy or like sbt3 said with the marine fiberglass.
|
JB Weld, from auto parts store
|
I cracked the edge of my board about a month ago and repaired it with a 2 part epoxy. Ive ridden it a bunch of times since and have had no problems. I got it from west marine...heres a link. <BR> <BR><a href="http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/10001/33621/10001/96/11160/4" target="_blank">http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/10001/33621/10001/96/11160/4</a>
|
May be this will work: <a href="http://www.buywake.com/catalog/detail/RA_8738" target="_blank">http://www.buywake.com/catalog/detail/RA_8738</a>
|
ok thanx guys!!!
|
<a href="http://www.buywake.com/catalog/detail/RA_8738" target="_blank">http://www.buywake.com/catalog/detail/RA_8738</a>
|
PC7 is a nice 2 part epoxy putty that I have used with good results to fill and patch boards. You can find it at hardware stores.
|
All times are GMT -7. The time now is 9:45 AM. |