Need help finding prop
I have a 2000 Moomba Kamberra with the Indmar 350. The prop is dinged up and I'm interested in finding a new one with a bit more pitch for the extra weight of my ballast and for a better hole shot. From my research I've found it has a 1 1/8" shaft. Where is a good place to get a new prop, can anyone tell me what I need to look for in the sizes or the prop and what pitch should I go with. We wakeboard and I have about 2100 pounds of ballast that I can run in the boat.
|
Call Nettle Props here in Austin. I always get my props repaired and purchase new ones through them. They should be able to help you out with which one you need for your specific boat, weight, etc...
|
|
|
The 2000 Moomba Kamberra either came with a 14x16 or 14x18 and should have an 1-1/8" shaft.
I would suggest decreasing the pitch to 14.25" in order to get the low end pulling power. Check out the Acme 1433 (14" x 14.25") or the OJ 466 (14.25" x 14"). |
Thank y'all for the help!!
|
All times are GMT -7. The time now is 6:19 PM. |