Just seeing if anyone has some "use this" or "don't use this" advice for patching a fat sac. The hole is about 1/4 inch in diam. Thanks in advance
|
Don't they come with a patch kit?
|
A water bed patch kit should work, or a bicycle tyre patch. Scuff up the surface and the back of the patch a little bit with some sandpaper and make sure it is dry before you glue the patch on. <BR> <BR> <BR> <BR>(Message edited by Jtnz on February 13, 2008)
|
Austin, <BR> <BR>I went to a pool supply store and asked for a pool patch (use their glue too, it actually works even BETTER underwater, so wetness isn't an issue)... works PERFECTLY.
|
Thanks Brian, sounds good to me. <BR> <BR>Brandon, you're probably right, but mine are ancient and if they did come with one it's gone now.
|
I used a patch I had laying around from a tube and Amazing Goop on mine. It worked really well.
|
Shoe Goo is pretty good stuff to create a patch in of itself(if the hole isn't massive). 'course an extra piece of rubber helps too ;)
|
All times are GMT -7. The time now is 1:59 AM. |