Thanks for the comments all... Grant, I am waiting for some more parts from Kris to complete the LED set up. I am also looking for some type of gasket (neoprene?) between the handle's and the gel to fill the gap. NAW: The excursion has a 6" lift in the front which is actually a 4" F350 pro comp softride spring, (raises an excursion 6". The rear is 4" blocks plus air bags to level. Simple and inexpensive kit. Tires are 325-65's on 18's. Ride is better than stock and tows and tracks better as there is much less tire sway with the 18's. Turning radius is stock, power is just a little down with the tires but its a diesel so no worries there. Bobby, The Super Truck is a blast...headed to Willow Springs tomorrow for the weekend!! I used to race circle track but converted the truck to road racing last year. You have a spec truck? Buzz, If things go well this spring we will pimp out the garage. I have some great things in the plan. The truss's on the big section were designed to hold 2000 lbs so I can lift the boat off the trailer with two chain hoists.
|