I made racks in my garage that holds eight boards with bindings, plus a wake skate, and wake surf board. Simply purchased two stnadard size 2x4's, 6 four ft. 1.5 inch thick dowell rods. Measured the distance I needed to fit a board and bindings, measured how long I need the dowell rods to be and cut them, measured equal distance from top to bottom on the 2x4, used a drill press to drill 1.5 inch holes in the 2x4 at a slight angle, drilled the 2x4 into existing garage wall studs, glued dowell rods into place. I spent 14.00 dollars, it looks really good and is super strong. I could have painted it to match the garage walls, but I wasn't that concerned with it matching, but it would look good painted.
|