View Poll Results: Do you think an automatic drain plug could be useful?
|
Yes
|
|
3 |
15.79% |
No
|
|
16 |
84.21% |
|
Join Date: Oct 2016
10-13-2016, 10:03 AM
|
Reply
|
https://docs.google.com/a/usd232.org...2G1XnHeR4/edit
Do you think there is a better solution to the drain plug than the known way??? Take the survey above.
|
Join Date: Jul 2009
Location: NJ
10-13-2016, 11:47 AM
|
Reply
|
This is a solution to a problem that doesn't exist, and it will create other problems. I don't trust cheap plastic parts in critical applications, nor do I trust a single o-ring for a drain plug. That plug design will get clogged up with junk eventually and not close, or bilge gunk will wear the plastic and oring resulting in sloppy fit and leaks after some time. When it breaks or wears out, I'd be looking at at least 24 hours to get back on the water to set a new garboard drain which only costs a few bucks and just plain works.
|
Join Date: Jul 2009
Location: NJ
10-13-2016, 12:14 PM
|
Reply
|
Also, I don't see how your design is automatic. It's a manual switch using a cable to open/close.
https://youtu.be/qS14C_s-JO8
There are some better mousetraps already which are cheaper and IMO superior.
Captive plug:
Check valve/safety:
Last edited by cadunkle; 10-13-2016 at 12:20 PM.
|
Join Date: Sep 2010
10-13-2016, 12:35 PM
|
Reply
|
I think it looks cool but I'd feel much more comfortable if it wasn't plastic. Also I marked that I did forget the drain plug, because I did, but only once on like my 2nd time out owning the boat. We made a lot of mistakes during our first season (~2003 maybe?) but I never forgot the plug after that first time.
|
Join Date: Apr 2006
10-13-2016, 12:36 PM
|
Reply
|
On my old MB DD the ballast ports on the back of the boat had the same hardware as everyone's drain plug. I just installed metal ball valves. This allowed me to just open these instead of getting out my wrench every time to drain at the end of the day or get the last bit of water out. If it ever failed it would just fill up my ballast so it wasn't an issue. Probably wouldn't want to do that for your main drain plug but would still be a better solution then OP's option.
|
Join Date: Dec 2013
10-13-2016, 5:07 PM
|
Reply
|
I have an automatic bilge so no practical need for an auto drain plug. My threaded brass plug is simple and works for whatever the bilge doesn't get. Auto drain would also get in the way of my oil drain hose that goes out through the drain plug hole.
|
Join Date: Dec 2013
10-13-2016, 5:48 PM
|
Reply
|
My v215 came with a captive plug. Love it. Metal, simple, and won't forget it anywhere.
|
Join Date: May 2010
10-14-2016, 8:13 AM
|
Reply
|
My last boat used a square head plug that needed a wrench. I drilled a hole through it and pressed in a brass rod that stuck out about 0.75-1" on each side so I could install and remove it by hand.
As for the automatic plug, "Do I think it COULD be useful?" Yes, am I interested in buying one, no. Simplicity rules.
|
Join Date: Jun 2015
10-14-2016, 8:16 AM
|
Reply
|
I feel like if your an avid boater you should have 1 or 2 spare plugs around at all times . I keep a spare in my truck and in the boat . I saved other peoples day by having those spare plugs as well.
|
Join Date: Feb 2013
10-14-2016, 11:36 AM
|
Reply
|
Imagine, if when you forgot your drain plug, that there was a way for your boat to automatically pump water out of the hull until you were able to get the plug back into the boat. Oh wait ... we already have bilge pumps. Solution to a problem that doesn't exist. The bilge pump was a great idea though. It works when you forget to clamp a hose when you install a new impeller as well.
|
Join Date: May 2004
Location: Tyler
10-14-2016, 1:51 PM
|
Reply
|
buy 3 plugs. one in the truck, one in boat, one in hole. problem solved.
|
Join Date: Mar 2002
10-17-2016, 7:09 AM
|
Reply
|
The standard brass t-handle is hard to improve upon. Who wants plastic or an automatic system below the water line. Its asking for problems. I throw my pug in the drivers foot tray and they never leave the boat so I do not forget about them.
Don't ever expect your bilge pump to keep up with a leak. It probably will not.
|
Join Date: Feb 2013
10-17-2016, 9:31 AM
|
Reply
|
It'll keep up long enough to get the problem fixed every time. If yours won't then you have the wrong ballast pump for your boat.
|
Join Date: Dec 2013
10-18-2016, 4:00 PM
|
Reply
|
Quote:
Originally Posted by srock
The standard brass t-handle is hard to improve upon. Who wants plastic or an automatic system below the water line. Its asking for problems. I throw my pug in the drivers foot tray and they never leave the boat so I do not forget about them.
Don't ever expect your bilge pump to keep up with a leak. It probably will not.
|
Bingo! I put it in the hatch cover in same spot so I can't forget to put in the plug cause hatch is off. And taking out the rear one is useless, driving up a levee water still doesn't come out that hole
Last edited by granddaddy53; 10-18-2016 at 4:04 PM.
|
Join Date: Mar 2002
11-23-2016, 8:15 AM
|
Reply
|
Quote:
Originally Posted by DenverRider
It'll keep up long enough to get the problem fixed every time. If yours won't then you have the wrong ballast pump for your boat.
|
Bilge / ballast... I always install a 2nd pump as backup and as added capacity. However, pull you plug and give your pump a test. It may surprise you.
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -7. The time now is 2:56 PM.
|
|