So tried to figure out speed and wave this weekend and couldn't dial it in. Never got a crisp wave. So wondering how any other owners setup? I did surf side full and other side half and changed speeds alot to try to find it. Also tried none in other side.
Heard that may have to add some weight to surf side in the mid seating area but hoping someone here has a set up that they can help me with.
My other MB had a surf tab and I had an awesome wave with just stock tanks. May have just not tried hard enough to find it, but someone here always has the answer so just gonna ask.
You cant get a clean wake on the boat without the trim tab. My in laws have one without the trim tab and I have tried but havent had any luck. It still puts out a strong wake, but I am stuck to doing only surface tricks. The wash wont let me get above the lip.
I know a guy who put this huge mud flap on his boat to knock the spray down and it cleaned the wave up. The flap was huge and not attractive, but it worked.
I suggest installing a trim tab if you want a clean lip.
Micah's very nice pics notwithstanding, the trim tab does do a great job of cleaning up wash and is a pretty straightforward DIY project. There are several pictorial "how to" threads on the MB forum.
Awesome Micah!! Thank you so much. YES I could add the tab, but it's over $2000 and just don't want to do that right now. So, I will likely buy a bag or something and get that weight like Micah. We all surf Regular, so I am hopeful this cures us.
Micah.... one more ask
Do you use stagnant weight or water bags? Also, if we are surfing REG... let me make sure I understand. weight in surf side locker, then weight in bow on surf side with non surf side hard tank with NOTHING in it?
Regular - Stock full, 540 bag in rear locker, 540 bag under seat infront of locker, and 540 bag up front on surf side ( and it wouldnt hurt to put a person p front also. makes the wash go away.
and im pretty sure you could just get a trim tab from like amazon or ebay. for much less than $2k.....im thinking $200
Hmmm ok... so where do I find this tab.. any links or help would be appreciated. I am pretty handy so I think I could do it myself, but not sure where to start.
Since I have asked all this, I might as well keep going.
Since we have gravity fed ballast how did you plumb your "fat Sacks" or whatever you are running? Did you hard wire them all in? pics of that?
Never had any additional weight in any of my 4 boats in the past but to get a wave that nice I am thinking about it. Just have no clue how to think about adding 750 in rear and weight in the nose. and how that even works..... is the pump external and you just throw it over and let it suck up the lake? lol sorry that is a stupid question but never seen externals filled or emptied.
So found someone with the actual MB plate, actuator, wiring harness and control box. $600. YES / NO? Says will make my guage work and should be able to use the rocker switch that is already in my boat.
Shawn - Nik anyone else with a thought on this deal?
Anybody have a pic of these MB's with the weight in it listed? That much weight has got to be scary... I have some old pics somewhere of an F21 weighted to its guts, have to see if I can find them...
Josh now that looks stupid. I am not going for that at all. Have 4 kids with me always so still need to be safe. That has to be way more weight than a bag in the surf locker and one up front.
That color scheme is my boat tho.... pickle fork and all. I just have the new tower.
Last edited by ScottR; 07-08-2015 at 7:03 AM.
Reason: Add
That's why I don't surf! I let my boy surf my F21 with 450 up front and 400 in the back locker and messed with the internal ballast. I was still a nervous wreck with rollers and coming off the throttle.
Hit up Drew Richardson (Surffresh) on here for the scoop on how to weigh your boat. This boat was not listed like the Tomcat above. Oh, and no exposed sacks.