Here is what you need to build a winch.. Of course you also need a frame and spool.. The engine brand also doesnt matter..
1. Briggs and stratton (at least 6.5HP) probably around 300 USD
2. Torq-a-verter brand CVT cover and transmission... around 180 USD
3. driven sprocket (i dunno how many teeth that sprocket is but you can use anywhere from 56 to 72 tooth sprocket with a 7 to 8 inch spool... about 30 USD
4. looks to be about 10ft of chain... #35 pitch chain is preferred but #41 will work as well approx 15 USD
5. Belt for the CVT comes with #2
6. hitch pin for transporting winch using the hitch of a car
7. pillow block bearings, holds shaft onto the frame... approx 30 USD
8. Gocart axle... 30 in long, cut to fit your frame... approx 30 USD
9. ibolt can be used for rope guidance 2 USD
10. Fairlead rollers for rope guidance onto the spool 10 USD
Ken Land
Bullet Lines
www.bulletlines.com www.wakeboarding-winch.com