Well I took out the pilot one gauge after my third one malfunctioned. These gauges just plain suck. Centurion doesn't even use em any more. WEll now my PP isn't reading speed. Checked all the wiring and well this is what I"ve come up with............ Green from pp paddle wheel wiring harness attached to green of actual paddlewheel as well as the factory speedo wire (grey with black stripe) Red from pp paddle wheel wiring harnessNOT ATTACHED tho the red from actual paddle wheel is attached to a purple power source. Brown from pp paddle wheel wiring harness NOT ATTACHED brown from actual paddle wheel is attached to the bare from the actual paddle wheel and then BOTH TO GROUND (So the red and brown from pp paddle wheel wiring harness are not connected and never were even when pilot one was installed. there is a sticker on them both stating boat has pilot 1 no need to use.) White from pp paddle wheel wiring harness connected to white from actrual paddle wheel. I would assume the problem is somewhere within the green wires as that gives the speed reading according to manual, but hey......I'm an amature Like I said my factory speedo is working so paddle wheel works, but no speed reading on the pp. Any info would be appreciated. Thought it be an easy fix. Cut out the Pilot one and re attatch SO MUCH FOR THAT
|