If you were to take a Byerly board and a Motive board and combine theminto one it would look very similar to this series. This kind ofversatility really might make it the "Premier" board. A ride designed bythe next generation.

"This is only my second full year with Hyperlite and I have alreadyre-designed my pro model shape from 2001. When we designed my board lastyear I was blown away with how it affected my riding. To me this shapedoes everything well. With a subtle 3-stage rocker it has the big snapoff the wake I was looking for but it still has the smooth consistent feelwhen the board releases. Depending on what depth center fin I put on it,if even one at all, the board can ride totally different. This year wemade the tip/tail a little bit stiffer, which helps out when I’m jibbingand also gives a little more boot off the wake. Hyperlite also made thestep down rail longer which gives the rail more bite when I’m edging.

I got a chance to work with the same artist on my graphics this year. Wetried to design a look, especially on my 135, that has never been aroundin wakeboarding. We also threw in a Pointless Production plug."

  Daniel Harf

The Premier Features

• 2.6" Subtle 3 - Stage Rocker- a combination of the smooth continuous rocker and the bucking explosion of a 3-stage rocker.
• Deep Step Down Rail - the deepest Hyperlite step down rail. Sits deeper on the water and increases the bite when on edge.
• "V" Bottom Full - Length Tunnel- breaks up the water on landings and aids tracking.
• Two 1.1" Premier Fiberglass Fins - these center fins provide the general grip for the board with a quicker release because of the shallow depth
• Four .8" Deep x 12" Long Molded-In Fins - these deep outer fins act as the primary form of traction and provide additional stability.
• Shallow Cupped Rails - a slightly more responsive grip into a turn.
• Vented Channels - increase the speed of the board when on edge.