Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    MX MUStermann (daniel210)      Join Date: Jul 2013       07-16-2013, 5:06 PM Reply   
hey folks,

im getting my boat ready for summer season and now, after replacing impeller and oil filter i have an issue with the replacement of the fuel filter.

the manual says:

Filter Element Replacement, ENGINE OFF

1. Disconnect the two-wire electrical connector.

2. Hold the 3/4 jam nut, located at the bottom of the FCC bowl, with a wrench. Remove the 7/16 plug, and drain the bowl contents into an approved container. CAUTION: Both fuel and water will drain from the FCC bowl.


So i removed the small nut underneath the FCC bowl - the gas drained completely .. no problem so far.
Problem is that the bigger nut (jam nut) came loose to!!

i had no wrench today, so i tightened the small nut back to the fcc bowl ... .. trying it tomorrow again after getting a wrench!
unlucky me i failed to tighten the big nut (jam nut) to the bowl.. so do i have a problem now or can i fix this after disassembling the fcc for fuel filter replacement.

appreciate your help

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 8:37 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us