Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    rzap (zap)      Join Date: Jan 2009       07-11-2013, 9:59 AM Reply   
To make a long story short, I have the following equipment in my boat:


Syn Micro powering a SS10B sub
6 cabing speakers, XS 650's
4 Rev 8's on the tower
2 HT6 amps to power the interior and tower speakers

I was thinking of using one HT6 to power the interiors and one HT6 (bridged) to power the four Rev 8's..... this way I can use the head units fade control to control the volume in the cabin vs the tower.

Should I be doing something different? Previously mentioned to me was to run a pair of Revs off of each Amp and some of the cabin speakers. In doing this I will loose the ability to control the volume level control so I will probably need to add a 420 eq.

Any help would be appreciated....
Old    Tim White (wetsounds1)      Join Date: Jan 2006       07-11-2013, 10:29 AM Reply   
You will want to bridge one HT-6 into 3 ch mode for 300x3. To 3 of the REV8. Then the other HT-6 will get two of the channels 5/6 bridged for the last rev 8 for 300x1. And then the remaining 4 chs will run the XS-650. Bow off chs 1-2 and the last two pairs in parallel off chs 3-4.

This will give you great power across the board. You just want to make sure you have the RCA correct when running the amps. The one in 3 ch mode would have one RCA into it with the button pressed for 2 ch input and ch 5/6 input off. The other would have 2 ch input pressed in and ch 5-6 input ON. You would use a Y adapter at the amps to put the tower RCA into the 1-2 input on the tower amp and the other rca into the ch 5-6 input on the other amp. Then the boat RCA would go into ch 1-2. This way you only need 3 RCA to the amps. Tower, boat and sub. You will still be able to use fade as well and easy upgrade to a 420 later.

You can call and talk to Simon or Rob or Gyver at the office if you need some help. 877-938-7757

Tim
Wet Sounds

Last edited by wetsounds1; 07-11-2013 at 10:33 AM.
Old    rzap (zap)      Join Date: Jan 2009       07-11-2013, 10:50 AM Reply   
Thank you Tim,

You Sir are a champion, I will call if I need help
Old    Ben R (brichter14)      Join Date: Jul 2010       07-11-2013, 1:41 PM Reply   
Gotta love that type of customer service
Old    John Bauer (jonyb)      Join Date: Nov 2008       07-11-2013, 1:51 PM Reply   
Doesn't get much better than that.

Remember guys, there's always someone there to answer the phone if you're in a jam. They're all great people to deal with.
Old    RB (boardman74)      Join Date: Jul 2012       07-11-2013, 7:47 PM Reply   
I have Rev 8's running same set up off a HT-4. Bridged 300 watts each and the scream!! Great power for the 8's!!

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 12:01 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us