Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Zach (zacharoo)      Join Date: Nov 2005       02-14-2013, 8:15 PM Reply   
I'm upgrading my single JL 12w6v2 sub in a sealed box to 2 JL 12w6v2's sub's in another sealed box. I'm powering the single sub with a JL 750/1 HD amplifier. The single box is currently in the compartment behind the drivers seat and the oem sub has been gutted for this frame only. I want to stay stock looking but want the dual setup for SQ and volume. MC - X15.

My Question is:

Will the 2 subs get 750 watts each or is the power divided between the two? If yes that both subs will get 750 watts how does that work and will that be hard on the amp?

I thought I would move up to a JL 1200/1 HD because I thought the amp shared the power....but going to try what I have first.
Attached Images
  
Old     (Truekaotik)      Join Date: Jun 2012       02-15-2013, 10:33 AM Reply   
Personally I would run dual 750.1's to the subs, configured Paralleling each sub to a amp... This will net the Wattage these subs like to see a piece.. If you don't want another amp, I'd downgrade the subs to two SVC4 12w3's with a 750.1.. You cannot Parrallel two DVC4's to one 750.1. sorry...
Old     (Truekaotik)      Join Date: Jun 2012       02-15-2013, 1:14 PM Reply   
Oh, I didn't state that you can also series/parallel the the two DVC4s to net a 4 ohm load at the amp and 375 watts to each speaker off one 750.1.. but I wouldn't be happy with that power to those speakers for several reasons.. good luck with the build and choices man
Old    Zach (zacharoo)      Join Date: Nov 2005       02-15-2013, 2:30 PM Reply   
Ok the sealed double box is built and is tuned to 38 hertz and it pounds so f'ing hard!!!

I found out that the single sub was configured to 8 ohms and i'm very disappointed in the original installer as I trusted him to setup the sub for is optimum output.

oh well its set at 4 ohms now and is right as rain now. The shop is going to resin the box inside and out and then cover it in gray carpet to seal it and make the box waterproof...I decided against lineX because its to rough and not as synthetically pleasing.

Pictures to follow...
Old    Zach (zacharoo)      Join Date: Nov 2005       02-16-2013, 10:55 AM Reply   
Here are a few pictures of the double sub box...
Attached Images
   

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 4:07 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us