Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Thread Tools Display Modes
Old     (nar722)      Join Date: Dec 2003       01-08-2013, 5:26 PM Reply

Has anyone ever tried this product? I have had problems with water pooling on my cover during a heavy rain and this seems like a good solution. However, I don't feel like cutting a hole in an expensive cover only to find out this gadget does not work
Old     (boardman74)      Join Date: Jul 2012       01-08-2013, 5:29 PM Reply   
Looks like the same thing that comes on the Tige factory covers. If so it works great.
Old     (NotSure123)      Join Date: Nov 2012       01-08-2013, 6:14 PM Reply   
I watched the whole video, but got sidetracked and forgot to pay attention to the product....

kidding aside, it looks long as they are priced right and hold up the wind w/o ripping through...? You could always just install a few female snap buttons in the low areas of your cover, get few wooden dowel rods, install the male ends of the buttons on the ends of the dowels, cut and adjust the heights, and bam got a solution for less than $10...?
Old     (mikebu)      Join Date: Aug 2008       01-08-2013, 7:46 PM Reply   
Corey at will do something similar in that he will sew on a patch with a loop in his covers under the middle of the tower and then you string a adjustable bungie cord to the loop and the tower. He recommends doing this but many customers don't like it so you have to ask him to do it.
Old     (wakebrdjay)      Join Date: Apr 2008       01-08-2013, 7:51 PM Reply   
That's Cobe's company and his wife,Tarah,showing it.
Old     (wakebrdjay)      Join Date: Apr 2008       01-08-2013, 8:09 PM Reply   
Cobe's product*
Old     (grant_west)      Join Date: Jun 2005       01-08-2013, 9:39 PM Reply   
Thats Pretty cool. The cover on our pontoon boat has these( but they are supported by poles not the tower) and they work as Vents as well. These look like they just work as a Pull point for the cover, Great simple Idea
Old     (SangerTom)      Join Date: Aug 2010       01-08-2013, 10:57 PM Reply   
Overtons and West Marine both sell a cover support pole. I got one that has vinyl straps that go from the bow to the support pole to the transom. It goes underneath the cover so there are no holes to cut. Works pretty good.
Old     (bwake)      Join Date: Sep 2009       01-09-2013, 2:02 AM Reply   
I just got the local upholstery shop to stich in a piece that attaches to a bungy cord that i tie to the tower. Works fine. Dont know why it isnt standard on these covers.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 3:43 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us