Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    MAC (mac_attack)      Join Date: Oct 2003       07-28-2012, 9:38 PM Reply   
Hello all,

I've been out of the game for awhile but today I was looking at buying a 2000 Xstar being sold by an individual. I looked at the boat a few days prior and made an offer on the boat pending a test ride.

Background
On the test ride (on a river) I was driving the boat down the center of the river and I hit something under the water with the Prop, shaft, guide, and rudder. We never saw anything and the depthfinder said the water was 27ft deep. The impact sounded pretty bad. Sounded like the boat hit something very solid. I ripped the throttle to idle and idled back knowing that it was best just to get it out of the water and see what's damaged.

The Damage
Prop=destroyed
Shaft=Unknown damage
Shaft Guide= Bent about 2-3 inches to the side.
Rudder/Hull=This is the tricky part. The rudder felt fine while still in the boat but after pulling the boat out of the water I noticed that the prop had somehow flexed and hit the back edge of the boat (if that makes since). I noticed one tiny (maybe 3/4 inch crack coming out of the fiberglass where the rudder attaches to the boat.


In the end I offered to pay the deductable but the owner said naw, how about we just split it. If it's fixed properly repaired I would still be interested in taking it home.

Questions

-Other than the obvious needed repairs visible on the outside, what are some other key areas of concern?


Tranny?
Engine?
Fiberglass integrity?
Etc?
Old    Mikeski (mikeski)      Join Date: Aug 2003       07-28-2012, 10:44 PM Reply   
I would take it for a test drive after the repairs. If everything checked out smoothly I would not hesitate to buy the boat. Be keen to check for minor vibrations or unusual sounds.
Old    kx250frider617            07-28-2012, 11:04 PM Reply   
I've had that happen to my tige, hit an under water rock that wasn't marked. It completely folded the prop and bent the rudder up into the hull. I couldn't steer or anything. Anyway, insurance fixed it at a local dealership and i Haven't had a problem since. And there isn't even any hint of there being an accident. If it's taken to a good shop, they will fix it good as new. I wouldn't worry about that.
Old    Markj (markj)      Join Date: Apr 2005       07-29-2012, 12:11 AM Reply   
Ditto on what mikeski said.
Old    MAC (mac_attack)      Join Date: Oct 2003       07-29-2012, 7:31 AM Reply   
Thanks for the response. I feel better about going on with the purchase, if it all checks out.
Old    Tim C (lifetimewarranty)      Join Date: Oct 2008       07-29-2012, 5:30 PM Reply   
The very first season with my last boat I hit a rock - basically tapped the rock with the prop. It barely bent over 2 prop blades which were easily repaired by a local shop. You'd never know it had been hit afterward.....but

The sound it made when I hit it...??? HOLY JEEZ!!!!!!!!!!!
Old    Cliff (ord27)      Join Date: Oct 2005       07-29-2012, 6:51 PM Reply   
X2 on the terrible sound
I hit a stump a few years ago. It completely lifted the boat out of the water. Prop cut a hole in the bottom of the boat, bent shaft, rudder, prop, lots of fiberglass work....etc.
After the repair, you couldn't even tell it had ever happened (both in performance and looks)

you might want to have a hand in deciding which shop does the repair job.
I was lucky in that our local shop for Malibus is one of the most awarded in the country for service....Waterski America, Dallas
if you like the boat, go for it
Old    MAC (mac_attack)      Join Date: Oct 2003       07-29-2012, 8:14 PM Reply   
Cliff, we did discuss the shops but I didn't know of a shop that does great work right off hand. If anyone knows a shop in Arkansas that does good work, has decent turn around time, and stands behind their work, please let me know.
Old    Cliff (ord27)      Join Date: Oct 2005       07-29-2012, 8:30 PM Reply   
call Texas Mastercraft in Fort Worth and ask them who they recommend in your area. They are a top notch outfit too.
Old    Joe Lo (JoLo_Si)      Join Date: Oct 2011       07-30-2012, 6:54 AM Reply   
Obviously stuff like this happens in boats. I agree with everyone that with a high quality repair you shouldn't have anything to worry about but deffinately check for vibrations when you get it back, that will tell most of the story.
Old    Rob (DealsGapCobra)      Join Date: May 2010       07-30-2012, 8:01 AM Reply   
When I started reading this I was expecting it to go differently. I figure the question was going to be "He wants me to pay for repairs..." His offer to split the deductible is what I would expect from a stand-up man...kudos. I hope the repairs are as they should be and you buy the boat.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 12:40 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us