Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Tings (tings00)      Join Date: Aug 2005       08-01-2012, 9:34 AM Reply   
when we bought our boat, 2003 Malibu VLX. we were recommended to put a piece of tape over the PP paddle wheel while trailering. This is to keep it from spinning while going down the freeway. So for years we have put a piece of duct tape on it after boating and have to remove it before. I have never seen anyone else do this or have heard of anyone doing this. Is it a waste of time and me climbing under the boat or does someone else have knowledge of this. Thanks.

Oh, and here is the latest pic of my stock wake, just cause...



Uploaded with ImageShack.us

Last edited by tings00; 08-01-2012 at 9:40 AM. Reason: pic
Old    Tuneman (tuneman)      Join Date: Mar 2002       08-01-2012, 9:38 AM Reply   
Unless you're driving 1000 miles every week, you're wasting your time.
Old     (MrPeepers)      Join Date: Aug 2011       08-01-2012, 10:06 AM Reply   
I think you got Punk'd.
Old    9Drozd            08-01-2012, 10:09 AM Reply   
^ x2
Old    Tings (tings00)      Join Date: Aug 2005       08-01-2012, 10:17 AM Reply   
Thats how i feel as well. But after all these years and never having a problem with it I wonder if it has actually been a good thing. Is that something that is known to wear out at all.
Old    9Drozd            08-01-2012, 10:24 AM Reply   
Ive only had to replace my paddle wheel once, and that was because we had to temporarily put it on another lift for the weekend and the bunks on the lift just happened to line up with the location of the paddle wheel.
Old    Tim C (lifetimewarranty)      Join Date: Oct 2008       08-01-2012, 10:52 AM Reply   
Don't forget to tie the prop to the rudder so the prop doesn't spin and the rudder stays straight!

The dealer told you to do that???!!!(if so....what dealership was it?)
Old    Nailem (nailem)      Join Date: Apr 2011       08-01-2012, 11:08 AM Reply   
my brother-in-law was told that when he bought his moomba from the dealer. we have always found it easier to just pull it but it is still a pain in the.... so i have wondered the same thing. i am pulling the boat tonight to travel to Norris Lake this next week 585 miles. so you say dont pull it?
Old    Tim (srock)      Join Date: Mar 2002       08-01-2012, 11:14 AM Reply   
When I first got perfect pass in 2002 it was suggested by the manufactuer that the paddle wheel be covered when trailering to prevent wear.
Old    Tim C (lifetimewarranty)      Join Date: Oct 2008       08-01-2012, 11:25 AM Reply   
LOL - I guess it is a common recommendation...but sounds like we don't care!

http://www.wakeworld.com/MB/Discus/m...tml?1112203187

My boat has thousands of unprotected trailering miles on the paddle wheel...works perfect.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 12:47 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us