Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Chad Wiegel (wiegs)      Join Date: Sep 2010       04-15-2012, 3:17 PM Reply   
I think I am going to attempt to build a bimini for our boat. If I can build the frame, I have family that can sew. It will be a cargo style bimini. Should I use 7/8" aluminum tubing or 1/2 steel conduit? I was shopping at a local hardware store and I can get everything I need in the steel conduit. They sell nice rounded corners. Building my own bimini will allow me to mount it solid to the monster tower. Thoughts or suggestions? Looking for good resources to purchase the materials.
Old    Jeff D (Jeff)      Join Date: May 2010       04-15-2012, 5:35 PM Reply   
Not the design you're talking about but here's a decent article:
http://www.duckworksmagazine.com/06/...mini/index.htm


They also sell Bimini specific hardware:
http://www.duckworksbbs.com/hardware/bimini/index.htm

They don't have tower clamps though. Diywake.com or eBay would be a good source for those.
Old    Jeff D (Jeff)      Join Date: May 2010       04-15-2012, 5:37 PM Reply   
Oh and http://www.sailrite.com/ for sunbrella, thread and other odds and ends.
Old    Markj (markj)      Join Date: Apr 2005       04-15-2012, 6:32 PM Reply   
I can promise you that the conduit will rust.
Old    Jeff D (Jeff)      Join Date: May 2010       04-15-2012, 6:38 PM Reply   
I'd build it with cheap conduit and a bender first. Then reproduce it with aluminum. SS would be great but I think you'd need more than your average hand conduit bender to bend it. I have an aluminum Bimini mounted to my tower and it's plenty strong.
Old    Markj (markj)      Join Date: Apr 2005       04-15-2012, 6:57 PM Reply   
^^^ Good idea with using conduit first.
Old    Jeff D (Jeff)      Join Date: May 2010       04-16-2012, 9:44 AM Reply   
I really wanted to make my own, hence having all of the above links and ideas available, but just had too many other things going on with the boat at the time. The wife and kids needed shade so I sucked it up and paid $700 or so for a TowerBiminis one. It's nice but too expensive.
Old    Anthonyv911 (tonyv420)      Join Date: Jul 2007       04-16-2012, 11:06 AM Reply   
My 800 dollar bimini is being built by Tower Bimini's as we speak. I know theirs are the best looking out there, I agree....very costly! My wife has been asking for one for 5 years now LOL. I laso have a 15mos old grandbaby now, who will def need some shade. Should be here next week. I can't wait to install it!!
Old    Chad Wiegel (wiegs)      Join Date: Sep 2010       04-16-2012, 3:16 PM Reply   
Why can't I paint or powder coat the conduit to prevent rusting. Also my boat does not sit outside so I would think that helps. I would like to keep the weight down as much as possible. I am guessing steal conduit is about double the weight. we have a small boat and I have added many new items(tower, swim platform, tower speakers, amp, 2nd battery). At this rate theboat may sink.
Old    Sparky Jay (wake_upppp)      Join Date: Nov 2003       04-16-2012, 9:03 PM Reply   
7/8 stainless would be best. Conduit is quite soft but as long as no one grabs ahold of it and puts any weight on it, it'll be fine. I did a conduit one on my last boat. 7/8 stainless on my current boat but as stated earlier, you wont be bending stainless with any old bender. I had to spend $230 for the bender to do mine.
Old    Chad Wiegel (wiegs)      Join Date: Sep 2010       04-20-2012, 5:39 PM Reply   
What would be the best way to mount to the tower. I need it to remove quickly> Do clamps exist the are quick release or I have seen pins that can pull to release? I fold my tower to put in garage, so the bimini needs to come off.
Old    Markj (markj)      Join Date: Apr 2005       04-20-2012, 11:42 PM Reply   
I really don't think this is gonna work for you given your stated expectations. Just save up and buy the cheapest one you can find.
Old    Sparky Jay (wake_upppp)      Join Date: Nov 2003       04-22-2012, 10:15 PM Reply   
Chad they make mounts with pins. If you need links, let me know.
Old    Chad Wiegel (wiegs)      Join Date: Sep 2010       04-23-2012, 4:11 PM Reply   
If you would provide the links, that would be great. Thanks.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 12:04 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us