What is the best way to get the gain set "perfect" on the new Syn2 I just added to the system?
Existing system had,Kenwood head unit.Audison Srx 5.1 amp running Arc Audio sub and 8 speakers, all Wetsounds,6.5's inrterior,Pro60's on tower. Instal was professionaly done by Scream Marine in Dallas TX. So all tuning done by them. I wanted more power to tower speakers so adding the Syn2. All speaker loads at amps are 2ohm. What is the best way to get the gain set perfect on the towers before mount complete because very difficult to get to settings where it's mounted at. Have crossover set for the Pro 60's at 100Hz /high pass per recommendation from Wetsounds, any input on that as well? Thanks