Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Non-Wakeboarding Discussion

Thread Tools Display Modes
Old     (hogger)      Join Date: Sep 2008       10-09-2011, 4:53 PM Reply   
I have some old waterski's and wakeboards that I want to hang up, and I'm not sure how to do it.
I want them to be vertical.
I don't want to put any holes in them, or screw through them.
I would prefer it to look as though they are floating on the wall, so no visible hooks, brackets, etc... If possible.

Anyone done this? Any ideas?
Old     (mc_x15)      Join Date: Jul 2008       10-10-2011, 1:36 PM Reply   
They make those little metal circular "clips" essentially 2 disks that screw together that would squeeze the board then have a post on the back that mounts to the wall. Use to use them to hang thick plastic posters at tradeshows. Would prob work for a snowboard or wakeboard. You would put them on either side.


Maybe make alittle shelf to sit them on and lean them against the wall. Maybe 2 small finishing nails on either side so they dont fall side to side.

Hope this helps.
Old     (bcrider)      Join Date: Apr 2006       10-11-2011, 9:07 AM Reply   
I have a metal bracket I made to mount a snowboard on the wall. Then I just used the binding holes to mount it to the bracket which works fine if you want to show the bottom but you have to get a bit more creative to have the top show. I will be making a new bracket soon as I want to mount my old B-Side to the wall and want to have the top on display. Attached is what I am thinking of making and the snowboard in my living room. I made the last one out of 1" flat bar from home depot. I know a guy that can do some welding so I had him just weld a couple spots. You could probably just bolt the thing together as well.
Attached Images
Old     (hogger)      Join Date: Sep 2008       10-11-2011, 9:56 AM Reply   
I've got the wakeboards figured out.
I'm using a sleeve, actually a rolled pin that is 2" long, and I'll put a screw through the fin holes on the board, then through the sleeve, and into a stud in the wall. The sleeve will give the board the separation from the wall.
Probably have to use a washer against the drywall so the pin doesn't sink into it.

Last edited by hogger; 10-11-2011 at 9:59 AM.
Old     (wazzy)      Join Date: Nov 2001       10-11-2011, 10:01 AM Reply   
We used to hang snowboards in the shop with strong fishing line. Put a binding bolt in (or 2) in the insert(s) to tie the line to. Or you could use the fin holes...

There was a company a friend of mine used to rep that made displays that you could use. They worked with grid wall & scissored around the edges of the board. You would see the 4 black rubber bumpers that touched the boards edges, but thats it. (I can't think of the name of the company, maybe I can dig it up)
Old     (wazzy)      Join Date: Nov 2001       10-11-2011, 10:02 AM Reply   
Some snowboard reps use guitar holders too. Although they are not super stable with a board on it.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 7:35 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us