Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Chris (cobra_nuggets)      Join Date: Mar 2010       10-03-2011, 8:17 PM Reply   
I have been running my Wakesetter in brackish water enough that I think I am going to put anodes on her this winter and I was hoping someone on here could answer some questions I had. I could not find much info floating around the internet dealing w/ inboards.

1. Which ones to buy

2. Where to put them

3. How to install them

4. Other tips/pointers/suggestions
Old    Mik (norcalrider)      Join Date: Jun 2002       10-04-2011, 10:25 AM Reply   
Lots of options but the least intrusive (doesn't require drilling) for brackish, would be an aluminum alloy, collar that fits your drive shaft. You will know how to install when you look at the anode. For reference: http://www.defender.com/ftp/anode-location-flyer.pdf
Old    Tim (srock)      Join Date: Mar 2002       10-04-2011, 11:24 AM Reply   
None of this stuff is bonded together so you will need a zinc on your wedge as well. I have only been in salt a hand full of times but man did the wedge get attacked.
Old    Mik (norcalrider)      Join Date: Jun 2002       10-04-2011, 11:57 AM Reply   
Quote:
Originally Posted by srock View Post
None of this stuff is bonded together so you will need a zinc on your wedge as well. I have only been in salt a hand full of times but man did the wedge get attacked.
Good point... Found this thread that might help. Cliff Notes from that thread: "Zincs on both left and right brackets of the swim grid. One zinc on the rudder and one zinc on the shaft." Here's the power wedge after 3 seasons moored in the ocean:
Running gear, note the anode on the rudder:
Old    Tim (srock)      Join Date: Mar 2002       10-05-2011, 6:39 AM Reply   
It may be just as easy to run a bonding wire inside the boat and attach to the mounting bolts of each component then find a place for a larger anode because the proper way is to protect every component in some way. Adding a anode to every little thing may be less practical than wiring.

Mik, your trailer has no visible cancer. That's rare for a painted trailer in salt.
Old    Mik (norcalrider)      Join Date: Jun 2002       10-05-2011, 2:06 PM Reply   
Quote:
Originally Posted by srock View Post
It may be just as easy to run a bonding wire inside the boat and attach to the mounting bolts of each component then find a place for a larger anode because the proper way is to protect every component in some way. Adding a anode to every little thing may be less practical than wiring.

Mik, your trailer has no visible cancer. That's rare for a painted trailer in salt.
Not my boat or trailer but I noticed that as well.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 1:43 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us