Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through August 27, 2003

Share 
Reply
 
Thread Tools Display Modes
Old    Wakejunky (wakejunky)      Join Date: Apr 2002       08-15-2003, 7:57 AM Reply   
Just finished up my latest project on the boat. I made a sub box for the area between the driver's seat and the rear seat of my 03' SAN. Doubled my cup holder capacity and I now have wrap around seating like the older SA's. Took a bit of work but, managed to get 1.5 cu. feet total for .75 on two sealed sub drivers. Running the Dayton Quatro drivers which have a recommended .35 cu. ft. sealed box. Carpeted the thing and then ordered a seat cushion from CC.

Check out the pics.

Chris
No Slip Gator Grip
www.wakejunky.com







Old    clint_h            08-15-2003, 9:00 AM Reply   
Sweet Job!
Old    Kung Fu Wake & Video (dcervenka)      Join Date: Sep 2002       08-15-2003, 10:31 AM Reply   
nice work and very clean looking! I'm sure the person in that seat will be in for one hell of ride...
Old    andy zarlengo (colorider)      Join Date: Jun 2001       08-15-2003, 12:13 PM Reply   
Give the person in that seat some rumble in the bumble
Old    TY-one-on (typhoon)      Join Date: Jul 2001       08-15-2003, 12:15 PM Reply   
did you port the cup holders?

great work...
Old    whitechocolate            08-15-2003, 1:05 PM Reply   
That Look's real good. What do you think it cost you to do the whole thing excluding the drivers,
What carpet did you use it looks like it matches perfect. It also looks like you used fiber glass resin to cover the MDF?
Old    Tom Barnard (tlb)      Join Date: Feb 2003       08-15-2003, 1:17 PM Reply   
Mine's at West Coast now. You can start it next, Nice job.
Old    Wakejunky (wakejunky)      Join Date: Apr 2002       08-15-2003, 1:37 PM Reply   
Hey Guys,

Grant: I used a single sheet of 3/4" MDF, about 16oz of Resin, 4 cup holders and scrap carpet from the shop, cushion from CC. Mind you I work for CC so, I got the cushion at cost so, I'm into it for about $170.

Cup holders are completely separate from the sub boxes. I put a separate chamber just for the cup holders so, they are not part of the 1.5 cu. foot sub chamber.

Chris
No Slip Gator Grip
www.wakejunky.com
Old    joeblocephus            08-16-2003, 7:27 AM Reply   
Chris,

Nice installation, looks great. Your occupation says engineer and you said you work for CC. Are you an} engineer for CC?
Old    Coinless (bruce)      Join Date: Feb 2002       08-16-2003, 3:35 PM Reply   
Chris, How does your SAN pull with the Lance? Which model of camper is that, a 920? We're still in a short bed 825 and like it although it is small with four.
Old    Wakejunky (wakejunky)      Join Date: Apr 2002       08-17-2003, 3:32 AM Reply   
Long story short but, I'm actually an out of work Test Engineer who is working at West Coast Correct Craft.
I have a Lance 2000 Lance 1120 a bit big for the SRW setup but, I've made enough mods to the truck's suspension and drivetrain to not worry about it too much.

Chris
No Slip Gator Grip
www.wakejunky.com
Old    endo            08-18-2003, 6:46 PM Reply   
Great work, but how does it sound? What are you pushing them with?
Old    John Hovde (mastercraft7100)      Join Date: Jul 2002       08-18-2003, 6:52 PM Reply   
Do you have new picture of your boat?

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 3:03 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us