Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Thread Tools Display Modes
Old     (eshowcase)      Join Date: Mar 2010       10-07-2010, 2:30 PM Reply   
I never found good pics or an easy how-to on this, so decided to write one up. This is a quick and dirty method for budget boats... hopefully it helps out a few folks. This was a DIY install of a Monster tower onto a '92 SNOB.

Old     (baitkiller)      Join Date: Jan 2010       10-07-2010, 4:01 PM Reply   
Any port in a storm.

That should work fine for quite a while. Some paint or least some Thompsons on that 2x4 may get a few more years out of it.

It was kind of you to post the how-to.
Old     (otown_dave)      Join Date: Dec 2007       10-07-2010, 6:36 PM Reply   
Mine are made of 2x4 Oak from a commercial pallet & run all the way to the floor from the gunnel Boxed top & bottom.
Old     (bill_airjunky)      Join Date: Apr 2002       10-07-2010, 9:39 PM Reply   
Nice writeup.

After having a couple of boats with similar installs, I have wondered if a top plate would do the install some good. Inevitably our boats have developed small cracks in the gelcoat around the tower bracket. Some not so bad, & others not so good. A top plate made of billet, carbon fiber, or even fiberglass or plastic would spread the load across the top, just like it does on the bottom side. And it could be made to look good too.
Old     (otown_dave)      Join Date: Dec 2007       10-20-2010, 8:17 PM Reply   
Like this?
Attached Images
Old     (david_e_m)      Join Date: Jul 2008       10-20-2010, 8:53 PM Reply   
Avoid pine as it will dry out and split over time. Even pressure treated pine will eventually have issues under stress. Definitely seal the blocks. Be sure to radius the corners and radius the edges of the blocks that fit up under and against the deck cap. While glassing in the blocks is the preferred method you can use a Tiger Hair, Kitty Hair or similar filler containing fiberglass strands to seat the blocks in place. As this cures it will fill any void between the blocks and deck cap with some structural integrity.
Old     (bill_airjunky)      Join Date: Apr 2002       10-20-2010, 9:16 PM Reply   
Quite a bit more substantial than I thought, Dave. But looks like it's doing a good job of spreading the load out over a larger area. Would be interesting to see the rest of the tower too.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 3:28 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us