We wakeboard mostly and want to surf as well. I have old fat sacs, so I think I will need the newer fittings. The height and width aren't a problem, the one locker has a battery box in it so it makes the locker shorter than the other one.
I wouldnt worry about the batter box. just fill it up and make sure its not going to rip or tear on anything. Let me dig around a little and I can dig up the part numbers of the fittings need. im assuming you have the 3/4" tubing?
Heres are a few pictures of my set up.
this is what I ordered. you will need 2 of each for each sack. These are the threaded piece that attaches to the sack and then the piece that attaches to the hose. The new quick connect system is really cool. since we only surf, we use the fitting from the non surfside sack on an extra piece of hose that has the old waterbed fittings on the opposite end, to fill our old sacks we put on the seats, this way we still use the same pumps.
Last edited by ilikebeaverandboats; 10-07-2010 at 5:34 PM.
Yes, my hoses are 3/4". All the plumbing is in, I just need to fine tune everything with the new sacs. I see people with amazing surf wakes and I know that the Sangers produce some of the best wakes as well. I've got the wake for wakeboarding perfect, it's super long, great shape and stiff now I want to get a great surf wake as well.
Here are my lockers, they are pretty large, so perhaps you guys are right, I should probably go with the 2 750's.
no problemo. if you need any help shoot me a pm, sounds like you got it tho!! 750's should fit like a charm. they make patch kits for those sacks that are basically bike tire patches, so if you need to fix the leaking one thats always an option.