Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Thread Tools Display Modes
Old     (cadunkle)      Join Date: Jul 2009       09-05-2010, 5:43 PM Reply   
Just picked up an '89 Supra Saltare today. Seems in pretty good condition overall. The rudder is loose though. If I grab it I can rock it back and forth a small amount, the bearings are a bit loose but doesn't seem to leak. I'd like to get new bearings and seal for the rudder. A google search doesn't turn up much. Anyone know a source for these parts? Also any input on the procedure to do this job? This is my first inboard. I'm mechanically inclined and have done body work on cars, rebuilt engines and manual transmissions. Seems like it should be a reasonably straightforward job if I can get the parts.
Old     (Bakes)      Join Date: Mar 2010       09-05-2010, 9:56 PM Reply   
I just replaced my rudder (98 Tige). I was very stiff to steer under load but was relatively easy to steer while stopped. I changed out the steering cable and that didn't help so I swapped out my rudder as well. I was a little suprised when my new rudder clunked as well. I went and checked a few rudders at the marina and they all had a little play and clunked (including a 2008 Malibu). Sooooo, based on that I am assuming a little play is normal in the rudder. Don't worry about replacing it unless it is leaky or is stiff.

If you do decide to swap it out, try Marine Hardware. Should run you a little over $500. It was pretty simple to install as well. I removed my water pump for access...otherwise it was very straightforward and easy to do. Seems like a new boat now that it handles so well.

Good Luck


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 7:11 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us