Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Trace (trace)      Join Date: Feb 2002       07-13-2010, 1:06 PM Reply   
My teak platform is about done, and I'm looking to replace it with a fiberglass unit. Any tips?

What's a fair price to pay for an OEM or an aftermarket unit? Any aftermarket sources worth mentioning?

Has anyone built one themselves? If so, details!

Thanks.
Old    Johnny (guma)      Join Date: Sep 2009       07-13-2010, 2:52 PM Reply   
ragboy built one from aluminum. Not sure if he posted the thread over here or just on the Tige forum, but he did it to clean up his surf wave. The OEM fiberglass platform was too big and the underside lip was cutting into his wave. Try a search for aluminum platform and see if it pops up here. I know it is over on the Tige Forum though.
Old    Bill K (bill_airjunky)      Join Date: Apr 2002       07-13-2010, 3:12 PM Reply   
Line-X the old one. And then a deck pad like Hydroturf or Seadek. I have that on my Vride now.
And I have an old MC swimstep on the back of my golf cart, with Herculiner on it.
Old    Ron Brash (Lantzvillian)      Join Date: Jul 2010       07-13-2010, 3:20 PM Reply   
I wouldn't buy a fiberglass swim grid for two reasons:

1.) wrecks your boards (I drop in surfing without the rope so it wrecks my surf)
2.) hit it on anything it will crack. Teak is great.. scuff and oil.

If its got black rubber on it, it gets hot on the feet
Old    KEVIN (kko13)      Join Date: Jul 2006       07-13-2010, 3:41 PM Reply   
Line-x that bitch and but a foam pad on it. Thats what I am doing this winter..last season for my teak I am so over it!
Old    Bill K (bill_airjunky)      Join Date: Apr 2002       07-13-2010, 3:48 PM Reply   
Oh, and if you use Line-X, they can do it in colors that will match your boat. And spray it with no grit. The stuff is tough as nails & actually embeds itself down into the wood. We did a test on the bottom & it reminded me of the roots in grass as you pull up sod.
My local Line-X dealer has done like a dozen different boats over the last 4 yrs. Even the older ones look great.
Old    Trace (trace)      Join Date: Feb 2002       07-13-2010, 6:34 PM Reply   
I would Line-X mine, but it has a pretty good warp going on in the middle, and the pieces are starting to come apart. It creaks and pops when you walk around on it, and it's developing some gaps here & there. Basically needs to be totally rebuilt.
Old    Trace (trace)      Join Date: Feb 2002       07-14-2010, 8:34 AM Reply   
Found a deal on a new fiberglass one from a V-ride. It's on the way now. Got a couple more questions...

Any ideas what would my old one might be worth? Maybe $100-150?

What would be the best way to attach the brackets? It appears from the pics to have no holes drilled in it yet. I would like to use threaded inserts instead of lag bolts. I'm thinking of tapping and epoxying in these:

Old    Bill K (bill_airjunky)      Join Date: Apr 2002       07-14-2010, 10:34 PM Reply   
I've never done inserts in a swimstep. But have done them in a SkySki board for bindings..... and then ripped them right out when we rode it.

If there is nothing in the board for the insert to grab, like in most any board, then you might end up with the same results.

Maybe test drill to see if there something other than foam in there? Or thru bolt it, then apply a deck pad over the bolt heads?
Old    Jon Doe (Kane)      Join Date: Mar 2010       07-15-2010, 3:31 AM Reply   
I would avoid the fiberglass also for the reasons Ron listed, plus if you leave the boat in the water, it goes dirty very quickly. and all the chips out of it look terrible. /2 cent
Old    Trace (trace)      Join Date: Feb 2002       07-15-2010, 7:49 AM Reply   
Good point, I didn't consider the possibility of a foam core. I would think that the core material is something that screws can bite into, at least in the area where the brackets mount. How are they attached at the factory?

Really, I just prefer the looks of 'glass platforms. My boat has kind of a utilitarian look to it anyway. I also hate maintaining teak. I would probably Line-X it if it were in better shape, but I came across a good deal on a 'glass one and want to give it a shot.

Thanks for the replies.
Old    Brian (silverlude)      Join Date: Apr 2004       07-19-2010, 6:33 PM Reply   
I hated my teak as well. We built a new platform from 3 layers of 7/8 treated plywood. Had it glass coated at a shop in Cincy and they painted it black before the finish coatings. We put Gator Grip Bl/Grey and it has been fantastic. 3 seasons and still looks great. Adds some nice weight onto the back as well. We just used BIG screws and coated the holes with marine adhesive before puttin em in and all has been fantastic, everyone loves it and we get many compliments. The Gator Grip has been worth every penny, great product, 3 seasons of 300-400hr use and still holding up great. Don't worry bout the chipping as you can simply use some spray paint to touch it up and you can barely tell. IMHO you will love it.
Old    Seahawks #1 Fan Robert T (cwb4me)      Join Date: Apr 2010       07-19-2010, 6:44 PM Reply   
i can't belive you guys my old correct craft teak deck looked like new and i only did the deck once a year.it was 15 years old when i sold it . my new tige is going on 4 years now and still looks new!
Old    Trace (trace)      Join Date: Feb 2002       07-20-2010, 9:23 AM Reply   
Maybe the quality of teak is better, because mine is back to dull and pasty looking about 2 outings after oiling it.

My new platform showed up yesterday, gonna work on mounting it this week. I guess I'll just do 1/4" lag bolts with 3M 5200. Worked well for 14 seasons on my old platform, so it can't be bad.

I've had Gator Grip covering pretty much every horizontal surface of my deck for about 8 seasons now, and it still doesn't look bad. Great stuff.
Old    Trace (trace)      Join Date: Feb 2002       07-23-2010, 9:00 PM Reply   
Just finished install... Digging it so far!

Before:


After:

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 6:39 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us