Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Thread Tools Display Modes
Old     (wayniac)      Join Date: Sep 2008       07-06-2010, 4:29 PM Reply   
luckily I was able to come into contact with a sandbar this weekend, and will have to replace my prop, as I lost a blade! No other damage done, but now I must replace! Any suggestions/good bad experiences with different brands? My mastercraft had an OJ I believe, but I am open to the best quality. If I have to spend the cash I want to get what makes me happy. The stocker was a bit sluggish all weighted down. Any brands problematic? This is my first replacement so I really have no experience to draw from. Thanks for any and all suggestions/comments!!
Old     (99_slaunch)      Join Date: Oct 2005       07-06-2010, 5:14 PM Reply   
The guys at Acme are great. Tell them what you do with the boat how much weight, how fast you pull, how far of a run to your spot etc. I'm real happy with the prop they recomended for me. Told me if I was not happy to send it back and tell them what I did not like about it and they would send me a different one bassed on new info. I will buy my next one from them for sure.
Old     (h2ohangtime)      Join Date: Aug 2002       07-06-2010, 7:06 PM Reply   
I second what Aaron said. I haven't purchased my new prop yet, but I had a good conversation with Bill @ Acme and he walked me through all the variables, then told me WHY he was suggesting the specific prop. I'm pretty sure both Acme and OJ are 100% CNC shops, so that shouldn't be an issue. I'd call both, though, as I've heard great things about Eric @ OJ as well.
Old     (ej_ojprop)      Join Date: Feb 2009       07-07-2010, 3:36 AM Reply   
Wayne - Would be happy to answer any questions you may have. Give me a call at 800-359-9730. Thanks, Eric Johnson.
Old     (wayniac)      Join Date: Sep 2008       07-07-2010, 3:40 PM Reply   
Thanks for the replies, I will give those guys a call. I also posted on GCWA and had a couple of replies telling me to be careful about shaft and bearings. Since I have never changed one before, is there anything to be careful of? Someone mentioned a prop puller as a must, should I look into buying one, or are they available to rent? I sure hope I am not changing these out every 6 mos! Someone asked about vibration and I did not have any at idle, only over 12-1300rpm so I idled the boat back, took over an hour to go what would normally take 3-4 min. but I am sure that I didnt hurt anything getting home. Out of curiosity what have others done in the same situation?


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 10:22 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us