Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Ozark King (onthewatermo)      Join Date: Jan 2008       06-08-2010, 9:32 AM Reply   
This boat has great fixer-upper potential but was hoping for some forum feedback before considering purchase.
FACTS:
-1993 Mastercraft Prostar 205 cosmetically sound, 330 hours
-Engine and transmission pulled after owner failed to winterize
-boat seller says $2400 and I get the boat, transmission, and engine
-further indicates, "all you need is a small block for a 351 which'll cost $600-$800"
-I am not too mechanically sound but my neighbors love to wrench and would put days into it
I'd be a fool to think it would be a straightforward restore, but what is the likelihood that the thing could run for less than $5K total investment?
Attached Images
 
Old    Bill K (bill_airjunky)      Join Date: Apr 2002       06-08-2010, 9:49 AM Reply   
Probably pretty good. Being "not too mechanically sound" definitely puts a cramp in things. But if your confident that your neighbors will be there to the end, I'd say go for it.
I like to tinker. But I have only been involved in two engine rebuilds, one of which was a 351 in a Prostar. We got it done for around $800, and learned a lot in the process. The only issue we ran into was that the engine we used was from a Mustang, which rotates the opposite direction of a boat 351. So we ran a Nautique prop on the MC after the rebuild.
Old    Brian Townsend (Baka123)      Join Date: Apr 2010       06-08-2010, 3:04 PM Reply   
A neighbor who would put days into it says GO FOR IT!!!
Old    Jos (jtnz)      Join Date: Sep 2007       06-08-2010, 3:52 PM Reply   
I'd jump on it, flick the parts from the original motor you don't need for funds and rebuild it, I wish I could get one that cheap...

If you could get a running motor for $600 - $800 it probably wouldn't be much work to put it in swap the marine gear over and go boating. I guess engine/transmission alignment would be something for a shop to do though.

Last edited by jtnz; 06-08-2010 at 3:54 PM.
Old    Trace (trace)      Join Date: Feb 2002       06-08-2010, 6:43 PM Reply   
Rebuilt longblock should be in the neighborhood of $1200, and go ahead and budget for intake and exhaust manifolds too (maybe $600).

Except for the cooler, the transmission should not be affected by not winterizing. Not sure what's up there, if anything, but that could be up to $2500 if it's beyond rebuildability.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 1:41 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us