Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Chris Bolding (chris_b)      Join Date: Feb 2007       05-22-2010, 8:55 PM Reply   
Today we were headed back to the ramp in our VLX and I felt a thump like I hit something and then the boat started vibrating bad. I shut it down quickly but when I put it back gear it vibrated badly and would not move hardly. I had to creep to the ramp and I loaded it by hand. What do you guys think? There was not even a mark on the prop or anything else under the boat. The prop spins fine by hand, and I couldn't feel any play in the shaft. Could it be bearings? I need some help on where to start here. Thanks.
Old    Derek (camassanger)      Join Date: Oct 2009       05-22-2010, 9:11 PM Reply   
hmmm... could it be the v drive? maybe the u-joint? the prop shaft shouldnt turn easily... were you able to make it turn a full revolution or so?
Old    Chris Bolding (chris_b)      Join Date: Feb 2007       05-22-2010, 9:16 PM Reply   
I have to force the prop to spin. I can't just flick it and it spins freely. I did not notice anything unusual around transmission, and all my fluids checked good.
Old    James (Silverbullet555)      Join Date: May 2010       05-22-2010, 9:35 PM Reply   
When you spun the prop to did you notice any wobble in the shaft?
Old    Bawshogg (bawshogg)      Join Date: Dec 2005       05-22-2010, 9:46 PM Reply   
If I had to guess, ... so you are saying it barely moves if you rev it up and try to go? Flexplates are somewhat known to have issues on the 05 models? what year is your boat? Check the coupler bolts that connect the v-drive to the shaft also.
Old    Chris Bolding (chris_b)      Join Date: Feb 2007       05-22-2010, 9:46 PM Reply   
none at all
Old    Chris Bolding (chris_b)      Join Date: Feb 2007       05-22-2010, 9:47 PM Reply   
mine is an 02
Old    Jeremy C. Adams (cal565)      Join Date: Sep 2005       05-23-2010, 4:51 AM Reply   
Wouldn't hurt to take your prop to get checked out. I have bent one before that you couldn't tell was bent just by looking at it, and my boat was doing the exact same thing. I got the prop repaired and all was good again. Just a thought.
Old    Jeremy (wake77)      Join Date: Jan 2009       05-23-2010, 6:26 AM Reply   
A slight bend in your prop can cause this type of vibration. That would probably be the first place I would start.
Old    Chris Bolding (chris_b)      Join Date: Feb 2007       05-23-2010, 7:46 AM Reply   
It has to be a bend that can't be picked up by a human eye. I also guage it to see if I could detect a bend. Today I am going to hook fake a lake to it and crank it in the driveway.
Old    Chris (rio_sanger)      Join Date: Apr 2007       05-23-2010, 7:47 AM Reply   
Put your spare prop on, (if you have one - if you don't, get one) And try it out ,good place to start.
Old    Chris Bolding (chris_b)      Join Date: Feb 2007       05-23-2010, 8:45 PM Reply   
I hook the fake a lake to it today and it seem like nothing ever happened?!?!?! So I went back to the lake put it in and it ran perfect. I talked to one of the residents on the lake and asked about the area where it happened. The guy said back about 20 years ago a man had a ski course out there and I might have got into an old bouy line. It must have wrapped around my prop, and then come loose before I got it on the trailer. Who would have thought. Thanks for the help guys, looks like a false alarm. For once it didn't cost me anything.
Old    Sparky Jay (wake_upppp)      Join Date: Nov 2003       05-23-2010, 10:36 PM Reply   
Always nice when a problem takes care of itself! Derek, not sure what you're talking about, "propshaft shouldnt turn easily". I could turn my propshaft with two fingers on the prop on all three Sanger Ive owned?
Old    Darren Yearsley (ralph)      Join Date: Apr 2002       05-24-2010, 1:47 AM Reply   
Yes but you have super human fingers! If my cutlas is dry my prop is hard to turn but much easier when wet I have normal fingers tho.
Old    Sparky Jay (wake_upppp)      Join Date: Nov 2003       05-24-2010, 6:04 PM Reply   
I have been told that sometimes I dont know my own strength. lol
Old    Fred (olmoomba)      Join Date: Apr 2010       05-26-2010, 12:48 PM Reply   
We had a something get caught on the prop, I was being pulled and my wife was drivin, the boat started to vibrate "violently" according to them. She pulled back the throttle, killed the engine immediately, I got in the boat and it ran fine. I assume your issue was similar like the resident said.

We assume a plastic bag got caught on the prop. OT - a plastic bag got caught on my scupper and we overheated. Plastic bags are phantom problems.
Old    Anthonyv911 (tonyv420)      Join Date: Jul 2007       05-26-2010, 1:23 PM Reply   
yea i hate those freakin plastic bags!! why can't people keep their darn garbage in the boat. sooo disrespectful to trash your lake. Nice that it was an easy fix for you Chris. My mechanic says never hook my engine up to a hose, don't know if this is good advice or not, sorry to jack the thread, i could start a new one, but was curious what anybody here has to say about that.
Old    Johnny (JohnnyDefacto)      Join Date: Mar 2010       05-26-2010, 2:01 PM Reply   
he only says that so that you feel like you cant do your own repairs/troubleshooting, so you have to take it to him instead....

when he gets it, he hooks it up to a hose...

I don't know him, so I am joking, but seriously...
Old    Fred (olmoomba)      Join Date: Apr 2010       05-26-2010, 2:35 PM Reply   
common thought is - use a fake a lake or a bucket. I take my flush line, put it in a 5gal bucket and have the hose there to refill the bucket.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 1:01 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us