The stock prop that I had on mine was OJ 13x17. When I measured the tip of the prop to the hull I had a litte over a 1/2 inch. The new prop is
13.125x14.25 Which will get the boat out of the water and plane quicker. But I live in Calgary, Canada . Our elavation is 3000 feet above see level.
Jorod Craig is right the 1643 is the way to go but I think there is a little more room for the prop in a Pro V then a Pro V2, but I am unsure. Also the Pro V2 is smaller boat the the Pro V so I think for my application the 1645 Prop is the Key. I hop this helps.
I think the cup size is .150
Last edited by rbeckei; 05-01-2010 at 10:13 AM.